Howard LC12P404160DUB00I LED 41W Canopy Fixture 6000K 12" X 12"

Parking garages

Residential exteriors

Perimeters

Entry ways

Walkways

Storage areas

Industrial/commercial spaces

Energy cost reduction up o 75%

Durable

Injection molded polycarbonate lens

Envioronmentally friendly

Sealed assembly (dirt and bug free)

Mercury-free

Multiple wattages available

CCT available - 6000K

Heavy-duty, die-cast aluminum housing

Silicon gasket ensures moisture and dust-free enclosure

Comparable to 175 Watt MH or 150 Watt HPS

Maintenance free for 12+ years

Input wattage: Multiple wattages available

Efficacy: Up to 70 Lumens per Watt

UL pending

Luminaire will be constructed of a one-piece cast aluminum alloy.

Made of a clear single piece UV stabilized prismatic polycarbonate.

LED Module: The LED light engine utilizes an aluminum metal clad board for maximum heat transfer, resulting in a longer life. the module consists of various orientations and arrangements allowing direction and instensity of the light to be controlled. Control of the LEDs allow Howard fixtures to maintain light levels equal to or greater than that of MH and HPS fixtures at a much lower energy consumption level and with an expected life that is greater than 60,000 hours. 

Class II constant current device is with a high-power factor correction to maximize power utilization. It meets UL 1310/UL 48 Class 2 (also available with Class 1) with a built-in over-temperature protection (>90°C). All drivers are 100% factory tested. Input voltage ranges from 120 to 277 VAC. It passes FCC part 15, class B for both conducted and radiated emissions.

Finish is polyester powder coat paint, 2.5 mil nominal thickness. The standard color is bronze. Custom colors are available. Consult factory. 

Fixture mounts to a recessed outlet box or can be surface mounted, or the fixture can be suspended from a 1/2" ridid conduit.