Kidde KN-COPE-D Battery Operated Combination Carbon Monoxide & Photoelectric Smoke Alarm

$50.95

* Tax Excluded

* No out of State Taxes 
 Final Tax(es) is/are calculated after delivery address added

The Kidde Front-Loading Smoke and Carbon Monoxide alarm (part# CP9000) offers protection from two hazards – fire and CO – in one unit. This 9-volt battery-powered alarm emits a beeping tone followed by a voice warning that clearly announces the danger by saying, “Fire! Fire!” or “Warning! Carbon Monoxide!” The uniquely designed front-loading battery compartment makes battery replacement quick and easy, and ensures proper installation

SKU #: KN-COPE-D

List Price: $60.95

Quantity

In Stock

100% secure payments

WANT A BETTER PRICE? MAKE AN OFFER

Rating:

(read one review)

Kidde KN-COPE-D Battery Operated Combination Carbon Monoxide & Photoelectric Smoke Alarm

Product Specifications:

Part Number: KN-COPE-D

Power Source: 9V battery

SmokeSensor: Photoelectric

CoSensor: Electrochemical

Audio Alarm: 85dB at 10ft

Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C)

Humidity Range: 10%-95% relative humidity, non-condensing

Size: 5.79” in diameter x 1.85” depth

Weight: 0.7lb

Interconnects: No

Warranty: 10 year limited

Alarm Warnings:

Fire:

The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message “FIRE! FIRE!” The alarm will repeat pattern until unit is reset or smoke is eliminated.

Carbon Monoxide:

Four short alarm beeps followed by a verbal warning “WARNING! CARBON MONOXIDE!” After four minutes the alarm/voice pattern will sound once every minute until the unit is reset, or the CO is eliminated.

Low Battery:

One chirp followed by warning “LOW BATTERY.” The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour the red LED light will flash once every minute accompanied by the chirp sound. The “LOW BATTERY” warning will only sound once every fifteen minutes. This cycle will continue for at least 7 days.

Voice Hush Indication:

“HUSH MODE ACTIVATED” and “HUSH MODE CANCELLED” voice announcement

Alarm Memory:

The green LED will blink once every 16 seconds to alert a user when the unit has alarmed for smoke or has detected a hazardous concentration of CO. If the alarm has detected a CO level of 100ppm or greater, when the Test/Reset button is pressed the unit will announce “CO PREVIOUSLY DETECTED.” If the alarm has detected abnormal levels of smoke since its last test, it will produce three rapid beeps. This alarm uses photoelectric sensing technology. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.